CorDx

One Step Transferrin Test

Categories ,

One Step Transferrin(TRF)Test is an in vitro immunoassay for the rapid, qualitative detection of transferrin in feces. This test is used to obtain a visual, qualitative result and is intended for professional and laboratory use.

Accessories:
Instruction for use, feces collection tube
Principle of Test:
Immunochromatographic assay
Product Performance:
Sensitivity: 40 ng/ml

Product Name Specimen Format Catalog No. Sensitivity Package Size Strip width
(TRF) Transferrin Test feces  Cassette H20-20 40ng/mL 25T/box,1500T/ctn 4.0mm

Intended Use

One Step Transferrin(TRF)Test is an in vitro immunoassay for the rapid, qualitative detection of transferrin in feces. This test is used to obtain a visual, qualitative result and is intended for professional and laboratory use.

SPECIMEN COLLECTION

  1. Collect stool sample by using the sample collection device provided.
  2. Unscrew the top of the sample collection device, take out the sample collection stick, and collect the sample by dipping the stick into 3~6different places of the stool sample.
  3. Put the sample collection stick back in the sample collection device and screw together tightly.
  4. If the sample cannot be tested on the day of collection, store the stool sample at 4°C. Bring the specimen to room temperature before testing.

TEST PROCEDURE

  1. 1.Remove the testdevice from the sealed pouch.
  2. Specimen collection. Please see also “SPECIMEN COLLECTIONAND STORAGE”.
  3. Shake the sample collectiontube several times.
  4. Holding the sample collectiontube upright, carefully unscrew the top of collection tube.
  5. Squeeze 2-3 drops of sample solution into the sample well“S”.
  6. Read results between 5 and 10 minutes. Do not read results after 10 minutes.

INTERPRETATION OF RESULTS

Positive: Two distinct pink-colored lines appear, one in the test region (T) and one in the control region(C). This indicates a positive result no matter the test region(T) is stronger or weaker than the control region(C).

Negative: Only one colored line appears in the control region(C). This indicates a negative test result.

Invalid: Control Line fails to appear. The test result is invalid regardless of the presence or absence of the test region(T).

NOTE:Insufficient specimen volume or incorrect procedural techniques are the most likely reasons for control line failure.Review the procedure and repeat the test with a new test strip. If the problem persists, please contact your local distributor.